Phase One iXM-RS280F
280 MP large-format aerial cameraRGB · Optional 4-BAND configurationiXM-RS280F creates a 280 MP central-projection image from two 150 MP nadir images. BSI CMOS sensors and dual 90 mm lenses deliver highly detailed aerial imaging over large areas.
Capture large areas in high detail.
Central projection
Two nadir images are converted into one 20150 × 14118 pixel central-projection image.
RGB and 4-BAND
The 4-BAND option supports different spectral outputs with an additional NIR sensor and lens.
Short exposure
A leaf shutter up to 1/2000 second aims to reduce motion blur during aerial imaging.
Camera and aerial system are separate configurations
Camera specifications, PAS 280 MK2 system information and iX Controller MK5 specifications appear under separate headings in the technical section.
Applications and use cases
Images and application information: Atay Mühendislik.
Technical specifications
Tap a heading to view the details.
Sensor and imaging
| Specification | Phase One iXM-RS280F |
|---|---|
| Frame Geometry | Central Projection |
| Resolution | 280 MP — 20150 × 14118 pixels |
| Image Format | PhaseOne RAW, IIQ-L, IIQ-S |
| Output Format | RS280F: undistorted RGB in 8- and 16-bit TIFF or JPEG; RS280F 4-BAND: undistorted RGB, NIR, CIR, RGBN, NDVI in 8- and 16-bit TIFF or JPEG |
| RGB/NIR Ratio | RS280F: – RS280F 4-BAND: 1:1.8 |
| Frame Width at 10 cm GSD (m) | 2.015 |
| Frame Height at 10 cm GSD (m) | 1.412 |
| Frame Area at 10 cm GSD (sq. km) | 2.84 |
Sensor and imaging (continued)
| Specification | Phase One iXM-RS280F |
|---|---|
| Average Image Size for 8-bit TIFF | RS280F: 833 MB RS280F 4-BAND: 1100 MB |
| Lens Type | Rodenstock |
| Number of Lenses | RS280F: 2 RS280F 4-BAND: 3 |
| Focal Length | RS280F: 90 mm RS280F 4-BAND: 90 mm & 50 mm |
| FOV (cross-track) | 45.7° |
| FOV (along-track) | 32.9° |
| Aperture Range | f/5.6 — f/11 |
| Exposure | Leaf Shutter |
Sensor and imaging (continued)
| Specification | Phase One iXM-RS280F |
|---|---|
| Shutter Speed | Up to 1/2000 second |
| Image Acquisition Rate | 2 frames/second |
| Light Sensitivity (ISO) | 50-6400 |
| Dynamic Range (dB) | 83 dB |
| NIR Range | RS280F: – RS280F 4-BAND: 720 – 1000 nm |
| Synchronisation (μsec) | 100 |
Sensor Specifications
| Specification | Phase One iXM-RS280F |
|---|---|
| Sensor Type | CMOS |
| Number of Sensors | RS280F: 2 RS280F 4-BAND: 3 |
| Pixel Size | 3.76μm |
| Array (pixels) | 14204 × 10652 pixels |
| Analogue-to-Digital Conversion (bits) | 14 bit |
Flight Specifications
| Specification | Phase One iXM-RS280F |
|---|---|
| Max. Ground Speed at 10 GSD with Motion Blur Below 1 Pixel (knots) | 390 |
| Max. Forward Overlap at 10 GSD and 150 Knots (%) | 97 |
| Max. Orthophoto Angle for 20% Side Overlap (deg) | 37 |
| Flight Height for 10 cm GSD (feet) | 7853 |
Operating Conditions
| Specification | Phase One iXM-RS280F |
|---|---|
| Power Input (VDC) | 12 — 30 V |
| Maximum Power Consumption | RS280F: 32 W RS280F 4-BAND: 48 W |
| Humidity (%) | 15% — 80% |
| Temperature | -10 — 40°C |
| Approvals | FCC (Class A), CE, RoHS |
PAS 280 MK2 Specifications
| Specification | Phase One iXM-RS280F |
|---|---|
| System Weight | RS280F: 32 kg RS280F 4-BAND: 33.5 kg |
| System Dimensions | 460 mm x 430 mm x 440 mm |
| Pilot Monitor for Navigation | 7″ |
| Operator Monitor for Camera Management | 15″ |
| Gyro-stabilizer SOMAG | DSM400 |
| Power consumption | 6A, 28V |
iX Controller MK5 Specifications
| Specification | Phase One iXM-RS280F |
|---|---|
| Connection Interfaces | USB3, power and control ports for camera and GNSS |
| Storage Capacity | 2 TB |
| Storage Unit | SSD |
| Removable Storage Unit | Yes |
| GNSS/IMU Configuration | AP180 (IMU – 69) AP310 (IMU – 82) AP510 (IMU – 91) AP610 (IMU – 57) |
4-BAND, PAS 280 MK2 and iX Controller MK5 information refers to separate configurations and components. System weights are not camera-body weights.
Let us define the right solution for your project.
Contact Atay Mühendislik for model selection, configuration and technical support.